Glass plate for DYCZ-24DN
-
DYCZ-24DN Notched Glass Plate (1.0mm)
Notched glass plate (1.0mm)
Cat.No.:142-2445A
Notched glass plate sticked with spacer, the thickness is 1.0mm, for use with DYCZ-24DN system.
Vertical gel electrophoresis systems are primarily used for nucleic acid or protein sequencing. Achieve precise voltage control using this format that forces charged molecules to travel through the casted gel since it is the only buffer chamber connection. The low current used with the vertical gel systems does not require buffer to be recirculated. DYCZ – 24DN mini dual vertical electrophoresis cell utilizes protein and nucleic acid analytical tools for application within all aspects of life science research, ranging from purity determination to analysis protein.
-
DYCZ-24DN Gel Casting Device
Gel Casting Device
Cat.No.:412-4406
This Gel Casting Device is for DYCZ-24DN system.
Gel electrophoresis can be conducted in either a horizontal or vertical orientation. Vertical gels are generally composed of an acrylamide matrix. Pore sizes of these gels depend on the concentration of chemical components: agarose gel pores (100 to 500 nm diameter) are larger and less uniform compared to that of acrylamide gelpores (10 to 200 nm in diameter). Comparatively, DNA and RNA molecules are larger than a linear strand of protein, which are often denatured prior to, or during this process, making them easier to analyze. Thus, proteins are run on acrylamide gels (vertically).DYCZ – 24DN is a mini dual vertical electrophoresis applicable for SDS-PAGE and native-PAGE. It has the function of casting gels in original position with our special designed gel casting device.
-
DYCZ-24DN Notched Glass Plate (1.5mm)
Notched glass plate (1.5mm)
Cat.No.:142-2446A
Notched glass plate sticked with spacer, the thickness is 1.5 mm, for use with DYCZ-24DN system.
-
DYCZ-24DN Glass Plate (2.0mm)
Glass plate (2.0mm)
Cat.No.:142-2443A
Glass plate with 2.0mm thickness, for use with DYCZ-24DN system.
DYCZ – 24DN mini dual vertical electrophoresis cell is for rapid analysis of protein and nucleic acid samples in miniature polyacrylamide and agarose gels. DYCZ – 24DN system make casting and running slab gels almost effortless. Only several simple steps can finish assembling the gel rooms. And the special wedge frame can fix the gel rooms in the casting stand firmly. And after you put the gel casting stand in the gel casting device and screw the two handles to the right position, you can cast the gel without any worry about the leakage at all. The sign printed on the handles or the alarm sound when you screw the handle will help you a lot. Please make sure that glass plate is clean and dry before proceeding.
